Copper River Electric handles the full range of residential electrical services across Spokane and the surrounding area. Whether you are building a new home from the ground up, upgrading an aging electrical system, adding a generator before the next winter storm, or wiring a pool, hot tub, or sauna for your backyard, we bring the same licensed professional craftsmanship to every job we take on. No project is too straightforward and none is too custom. If it involves residential electrical work in the Spokane area Copper River Electric is the call to make.
Everything You Need From a Residential Electrical Contractor Under One Roof
New construction electrical is one of the most important and most detail-oriented phases of building a home and it sets the foundation for everything that comes after. Get it right and the electrical system in your new home will serve you reliably for decades without issues. Get it wrong and you are looking at expensive corrections down the road, failed inspections, and potentially serious safety concerns.
Copper River Electric works with homeowners, general contractors, and builders across the Spokane area to handle all electrical work on new construction projects from the ground up. We start with a thorough review of the plans and electrical requirements for the project, coordinate our timeline with the other trades on the job, and execute the rough-in, trim-out, and final connections with the clean organized workmanship that makes our work easy to inspect and easy to live with for years to come.
Remodeling a home is one of the most exciting and most logistically complex things a homeowner can undertake and the electrical work is almost always more involved than it looks from the outside. Walls come down and old wiring that was never quite right gets exposed. New layouts require circuits that did not exist before. Kitchen remodels need dedicated circuits for modern appliances that the original panel was never sized to handle. Basement finishes require a complete electrical build-out from scratch. All of it needs to be done correctly, to the current code, and on a timeline that keeps the rest of the project moving.
Copper River Electric handles the electrical side of remodel projects across the Spokane area with the kind of practical, organized approach that makes us easy to work with for both homeowners managing their own remodels and general contractors who need a reliable electrical sub that shows up, does excellent work, and communicates clearly throughout the job.
The electrical panel is the heart of your home’s electrical system and older homes in Spokane frequently have panels that were designed for a fraction of the electrical load that modern households place on them. If your breakers trip regularly under normal household use, if you are running extension cords because you never have enough outlets where you need them, if your panel feels warm to the touch or makes buzzing or crackling sounds, or if you are planning a significant addition or major appliance upgrade, it is time to have your panel and service evaluated by a licensed electrician.
Copper River Electric performs full panel replacements and service upgrades for homeowners throughout the Spokane area. A service upgrade typically involves replacing the existing panel with a larger capacity unit, upgrading the service entrance from the utility company to handle the increased load, and bringing the installation up to current Washington State electrical code.
Power outages in the Spokane area are a real and recurring fact of life, particularly through the winter months when ice storms and high winds can take down power lines and leave neighborhoods without electricity for hours or days at a time. A properly installed generator gives your home the protection and peace of mind that comes from knowing the lights will stay on, the heat will keep running, the sump pump will keep working, and the food in your refrigerator will survive whatever the weather throws at the power grid.
Copper River Electric handles the full electrical side of generator installations across the Spokane area, covering everything from whole home standby generator hookups to transfer switch installations for portable generators.
A whole home standby generator is permanently installed outside your home, connected directly to your electrical panel through an automatic transfer switch, and powered by natural gas or propane. When the power goes out the generator detects the outage and starts automatically within seconds, restoring power to your home without any action required on your part. When utility power returns the generator shuts off automatically and transfers power back to the grid.
If you already own a portable generator or prefer a more economical backup power solution, a properly installed manual transfer switch or generator hookup inlet gives you a safe and legal way to connect your generator to your home's electrical system without the dangerous practice of back-feeding through an extension cord.
Pool electrical work is among the most highly regulated and safety-critical electrical installations in residential construction and for good reason. Water and electricity are an inherently dangerous combination and the electrical code requirements that govern pool installations exist specifically to protect swimmers, bathers, and anyone in the vicinity of the pool from the risk of electric shock or electrocution. Hiring a licensed electrician with specific experience in pool electrical work is not optional when it comes to a pool installation. It is essential.
Copper River Electric handles all electrical work for pool installations in the Spokane area including pump and filter motor wiring, pool lighting installation including underwater lighting, GFCI protection for all required circuits, bonding of all metal components in and around the pool, outdoor outlet installation for pool equipment and accessories, and all permit and inspection coordination required by Washington State and local Spokane codes. We work closely with pool contractors and homeowners to ensure the electrical phase of the installation is completed correctly, on schedule, and in a way that will pass inspection the first time without corrections.
Hot tub and spa electrical installation is another area where the specific code requirements exist for genuine safety reasons and where cutting corners or hiring an unlicensed contractor creates real risk for the people using the equipment. Most hot tubs and spas require a dedicated 240 volt circuit with a specific amperage rating, GFCI protection, a disconnect located within sight of the unit, and proper bonding of all metal components. Getting any of these elements wrong creates a safety hazard and a code violation that can affect your homeowner’s insurance and your ability to sell your home.
Copper River Electric handles hot tub and spa electrical hookups for homeowners throughout the Spokane area, including all panel work required to add the dedicated circuit, conduit and wire runs from the panel to the spa location, GFCI breaker installation, disconnect installation, final connection to the spa equipment, and all required permits and inspections
Saunas are one of the fastest growing home additions in the Pacific Northwest and the Spokane area is no exception. Whether you are installing a traditional Finnish sauna, an infrared sauna, or a barrel sauna in your backyard, the electrical requirements vary by unit type and need to be handled by a licensed electrician who understands those differences and can wire the installation correctly for both safety and optimal performance.
Traditional electric saunas typically require a dedicated 240 volt circuit sized to the heater’s specific amperage requirement. Infrared saunas vary widely in their electrical demands depending on the size and configuration of the unit. Outdoor sauna installations add the additional considerations of weatherproof wiring, proper grounding, and the specific requirements for electrical installations in outdoor structures. Copper River Electric handles sauna electrical installations of all types across the Spokane area, working from the panel all the way to the final connection at the sauna unit and coordinating all required permits and inspections along the way.
Saunas are one of the fastest growing home additions in the Pacific Northwest and the Spokane area is no exception. Whether you are installing a traditional Finnish sauna, an infrared sauna, or a barrel sauna in your backyard, the electrical requirements vary by unit type and need to be handled by a licensed electrician who understands those differences and can wire the installation correctly for both safety and optimal performance.
Traditional electric saunas typically require a dedicated 240 volt circuit sized to the heater’s specific amperage requirement. Infrared saunas vary widely in their electrical demands depending on the size and configuration of the unit. Outdoor sauna installations add the additional considerations of weatherproof wiring, proper grounding, and the specific requirements for electrical installations in outdoor structures. Copper River Electric handles sauna electrical installations of all types across the Spokane area, working from the panel all the way to the final connection at the sauna unit and coordinating all required permits and inspections along the way.
Decorative ponds, fountains, waterfalls, and other outdoor water features add genuine beauty and character to a Spokane property and the electrical work that powers them needs to be done with the same care and safety considerations that apply to any outdoor installation near water. Pump motors, underwater lighting, aerators, and water feature controllers all require properly installed and protected electrical circuits that can handle outdoor exposure and the specific demands of continuous operation.
Copper River Electric handles all electrical work for pond and water feature installations including pump and motor circuit wiring, underwater and landscape lighting installation, GFCI protection for all water feature circuits, weatherproof outlet installation for feature equipment and accessories, and low voltage transformer installation for landscape lighting systems. We work with landscape contractors and homeowners to coordinate the electrical side of water feature installations cleanly and efficiently so the finished product looks great and operates reliably for years.
Not every electrical project fits neatly into a standard service category and that is exactly the kind of work Copper River Electric was built for. Dyllan and the team genuinely enjoy the problem-solving aspect of custom and non-standard electrical projects because they require the kind of creative thinking and practical expertise that comes from years of varied electrical experience rather than a one-size-fits-all approach to the trade.
Custom electrical work at Copper River Electric includes specialty lighting installations, home theater and media room wiring, electric vehicle charging station installation, workshop and garage electrical build-outs, accessory dwelling unit electrical, agricultural and outbuilding wiring, outdoor kitchen and entertainment area electrical, landscape and architectural lighting, and any other electrical project that does not fit cleanly into a standard residential category. If you are not sure whether we handle what you are thinking about, give us a call and describe the project.
Regardless of which service you are hiring Copper River Electric for, a few things are true of every single job we complete. We pull the required permits for every project that requires them and coordinate all inspections to ensure the work is signed off properly by the local authority. We clean up thoroughly when the job is finished so your home looks the way it did when we arrived. We communicate throughout the project so you always know where things stand and what is coming next. We price every job honestly upfront and we do not spring unexpected charges on you after the fact. And we stand behind the quality of our work because our reputation in this community is something we take personally.
Whatever your electrical project looks like, Copper River Electric is ready to take a look and give you a straight honest quote with no pressure and no runaround. Give us a call, shoot us an email, or fill out the contact form and we will get back to you quickly to discuss your project and get you scheduled.
